Part 5 of 7 – Signage
Attempts allowed: 4
Grading method: Highest grade
Time limit: 0
Quiz Summary
0 of 3 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Quiz complete. Results are being recorded.
Results
0 of 3 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 3
1. Question
Question 1
Determine whether the following signs are required for the installed BESS. If they are required also select the location of the sign otherwise select not required. Refer to section 7 in AS/NZS 5139:2019 and section 10.10 in the textbook.
CorrectIncorrect -
Question 2 of 3
2. Question
Question 2
Determine whether the following signs are required for the installed BESS. If they are required also select the location of the sign otherwise select not required. Refer to section 7 in AS/NZS 5139:2019 and section 10.10 in the textbook.
CorrectIncorrect -
Question 3 of 3
3. Question
Question 3
-
All AC and DC conduit should be labelled to clearly identify what energy source it is attached to. For example, battery DC conduit should state Battery on it. The labels should be visible and reoccurring every m along the conduit or cable duct used. AS/NS 4777.1-2024 6.11.3.2.
CorrectIncorrect -